The secret of safe braking also lies in the pads
Brembo, the world leader in brakes, Integra its offer with a complete range of high-performance pads, the result of cutting-edge technology aimed at improving the safety of the entire brake system.
With a wide variety of compounds, from sintered to carbon-ceramics, and a very large number of product codes, Brembo meets the specific needs of all types of motorcycles - for competition, road, city, off-road - and the expectations of all pilots.
Compounds
The compounds normally used in brake systems can be classified into only two families, ORGANIC and SINTERED and the use of one type rather than the other is absolutely not linked to its use: in fact there are different types of brake pads in the same field of use.
Sintered materials: they are composed of metallic powders, with additions of lubricants and abrasives which are agglomerated with each other through a process with high pressure and temperatures. The compound is fixed to the metal support of the desired shape during the sintering process without adding any glue. Metal powders determine how much the brake pad brakes and how stable it is at high temperatures; lubricants contribute to the overall stability of braking, abrasives keep the discs clean.
Organic materials: they are mainly composed of binder resins, metals, lubricants and abrasives. In this case the friction coefficient is generated by metals and resins, while lubricants and abrasives perform the work described above.
Choice of compound: the pads have their own field of application. This depends on the different situations that a brake pad has to face: racing - favors braking at high temperatures, road - high stability, cold braking and medium temperatures. Brembo has an answer for every need.
Running: it is very important for all compounds and even fundamental for the RC compound. This operation is completed by carrying out a series of light brakes and a subsequent braking, leaving time between one and the other. A correct heating and cooling thermal cycle of the system is thus performed. The running-in period depends on the type of compound: longer running-in for the organic ones compared to the sintered ones.
The performance of the compounds, very different from each other, are described through the following parameters:
Efficiency (i.e. how much the pad brakes): it is expressed through the average coefficient of friction and the stability of friction at the main quantities that characterize braking (speed, deceleration, temperature). It is detected through appropriate tests on the bench and on the vehicle.
Usury: it is expressed as the amount of friction material worn (in mm. thick or in volume) compared to the number of braking performed (bench) or Km. routes (vehicle).
The functional differences between the various compounds can be summarized by observing the friction coefficient as a function of the operating temperature: the RC compound (Racing organic, where 350 - 450 ° C. Of operating temperature can be considered normal conditions) has a very high hot friction coefficient, while road compounds (as is the sintered SA road) are designed to work best at medium / low temperatures, and precisely around 300 ° C. So the latter, if used on the track and therefore stressed beyond measure, will be affected by the "fading" effect, that is the degradation of the friction coefficient: in fact, beyond a certain temperature, they will tend to lose efficiency. On the contrary, using Racing compounds on the road (and therefore with cold discs), the grip will not be so good and the braking may be a little long. The intermediate compounds are naturally a compromise between these situations described, they will provide good performance in all conditions while not excelling at the two extreme ends of the operating temperature range.
The secret of safe braking also lies in the pads
Brembo, the world leader in brakes, Integra its offer with a complete range of high-performance pads, the result of cutting-edge technology aimed at improving the safety of the entire brake system.
With a wide variety of compounds, from sintered to carbon-ceramics, and a very large number of product codes, Brembo meets the specific needs of all types of motorcycles - for competition, road, city, off-road - and the expectations of all pilots.
Compounds
The compounds normally used in brake systems can be classified into only two families, ORGANIC and SINTERED and the use of one type rather than the other is absolutely not linked to its use: in fact there are different types of brake pads in the same field of use.
Sintered materials: they are composed of metallic powders, with additions of lubricants and abrasives which are agglomerated with each other through a process with high pressure and temperatures. The compound is fixed to the metal support of the desired shape during the sintering process without adding any glue. Metal powders determine how much the brake pad brakes and how stable it is at high temperatures; lubricants contribute to the overall stability of braking, abrasives keep the discs clean.
Organic materials: they are mainly composed of binder resins, metals, lubricants and abrasives. In this case the friction coefficient is generated by metals and resins, while lubricants and abrasives perform the work described above.
Choice of compound: the pads have their own field of application. This depends on the different situations that a brake pad has to face: racing - favors braking at high temperatures, road - high stability, cold braking and medium temperatures. Brembo has an answer for every need.
Running: it is very important for all compounds and even fundamental for the RC compound. This operation is completed by carrying out a series of light brakes and a subsequent braking, leaving time between one and the other. A correct heating and cooling thermal cycle of the system is thus performed. The running-in period depends on the type of compound: longer running-in for the organic ones compared to the sintered ones.
The performance of the compounds, very different from each other, are described through the following parameters:
Efficiency (i.e. how much the pad brakes): it is expressed through the average coefficient of friction and the stability of friction at the main quantities that characterize braking (speed, deceleration, temperature). It is detected through appropriate tests on the bench and on the vehicle.
Usury: it is expressed as the amount of friction material worn (in mm. thick or in volume) compared to the number of braking performed (bench) or Km. routes (vehicle).
The functional differences between the various compounds can be summarized by observing the friction coefficient as a function of the operating temperature: the RC compound (Racing organic, where 350 - 450 ° C. Of operating temperature can be considered normal conditions) has a very high hot friction coefficient, while road compounds (as is the sintered SA road) are designed to work best at medium / low temperatures, and precisely around 300 ° C. So the latter, if used on the track and therefore stressed beyond measure, will be affected by the "fading" effect, that is the degradation of the friction coefficient: in fact, beyond a certain temperature, they will tend to lose efficiency. On the contrary, using Racing compounds on the road (and therefore with cold discs), the grip will not be so good and the braking may be a little long. The intermediate compounds are naturally a compromise between these situations described, they will provide good performance in all conditions while not excelling at the two extreme ends of the operating temperature range.
PLEASE NOTE THAT CUSTOMS FEES FOR EXTRA EU SHIPMENTS ARE BORNE BY THE PURCHASER.
BUY THROUGH THE FUNCTION BUY IT NOW,
BUT DO NOT PROCEED WITH PAYMENT.
ONCE YOU PURCHASED ALL ITEMS VI
WE WILL SEND A SUMMARY
OF PURCHASES MADE WITH ONE COST
shipments
Shipments related to your orders will be made exclusivelyby express courier GLS EXECUTIVE
BUT DO NOT PROCEED WITH PAYMENT.
ONCE YOU PURCHASED ALL ITEMS VI
WE WILL SEND A SUMMARY
OF PURCHASES MADE WITH ONE COST
NCDM 2000 sas is a company on the market for over 40 years, specialized in the wholesale and retail trade of the best brands on the market in the world of 2 wheels.
Credit Card Payment:
The Customer must be the valid credit card holder when ordering the Products purchased online. At no time during the purchase procedure NCDM2000SAS is able to know the information relating to the customer's credit card, transmitted via a secure connection directly to the website of the bank that manages the transaction. Payment by credit card is via PayPal circuit.
Payment with Paypal:
If you choose to purchase through the Paypal payment methods, at the end of the order, you will be directed to the Paypal login page. The amount of the order is debited from the Paypal account when the order is acquired. In case of cancellation of the order both by the Customer and in case of non-acceptance of NCDM2000SAS, the amount will be refunded to the Customer's Paypal account. Paypal protects the buyer information by adopting the most advanced security systems.
The products will be shipped only after the credit is displayed on our bank account. The order will start when credited. Usually the timing of the credit varies from bank to bank and is a maximum of 5 working days.
Purchases made on the NCDM2000SAS website are governed by Italian law on mail order sales. In the event that the customer has made a mistake in the order and has received an item he did not want, he has 14 (fourteen) days from the delivery date to exercise the right of withdrawal, or the possibility of returning the product.
Pursuant to articles 64 and following Legislative Decree 206/2005, the consumer customer, i.e. a natural person who acts for purposes unrelated to any business, commercial, craft or professional activity carried out, has the right to withdraw from the purchase contract for any reason and consequently has the right to return the goods purchased and to obtain reimbursement of the expenses incurred, in compliance with the methods indicated below.
The right of withdrawal is subject to the following conditions:
- The law applies to the product in its entirety and not to parts or components of it;
To exercise the right of withdrawal, the customer, without the need to provide explanations and without any penalty, must send within the term of 14 (fourteen) days from the day of receipt of the goods, a communication stating the intention to withdraw from the contract .. The goods must be returned intact and carefully packed in the original packaging, complete with all accessories.
NCDM2000SAS is not liable in any way for damage or theft / loss of goods returned by uninsured shipments. The NCDM2000SAS will refund the price of the goods for which the customer has exercised the right of withdrawal provided that the goods are intact and unused.
If you wish you can indicate fraction / locality / other separately.
It is important that you report a telephone contact to the courier.
NCDM 2000 sas is a company on the market for over 40 years, specialized in the wholesale and retail trade of the best brands on the market in the world of 2 wheels.
Credit Card Payment:
The Customer must be the valid credit card holder when ordering the Products purchased online. At no time during the purchase procedure NCDM2000SAS is able to know the information relating to the customer's credit card, transmitted via a secure connection directly to the website of the bank that manages the transaction. Payment by credit card is via PayPal circuit.
Payment with Paypal:
If you choose to purchase through the Paypal payment methods, at the end of the order, you will be directed to the Paypal login page. The amount of the order is debited from the Paypal account when the order is acquired. In case of cancellation of the order both by the Customer and in case of non-acceptance of NCDM2000SAS, the amount will be refunded to the Customer's Paypal account. Paypal protects the buyer information by adopting the most advanced security systems.
The products will be shipped only after the credit is displayed on our bank account. The order will start when credited. Usually the timing of the credit varies from bank to bank and is a maximum of 5 working days.
Purchases made on the NCDM2000SAS website are governed by Italian law on mail order sales. In the event that the customer has made a mistake in the order and has received an item he did not want, he has 14 (fourteen) days from the delivery date to exercise the right of withdrawal, or the possibility of returning the product.
Pursuant to articles 64 and following Legislative Decree 206/2005, the consumer customer, i.e. a natural person who acts for purposes unrelated to any business, commercial, craft or professional activity carried out, has the right to withdraw from the purchase contract for any reason and consequently has the right to return the goods purchased and to obtain reimbursement of the expenses incurred, in compliance with the methods indicated below.
The right of withdrawal is subject to the following conditions:
- The law applies to the product in its entirety and not to parts or components of it;
To exercise the right of withdrawal, the customer, without the need to provide explanations and without any penalty, must send within the term of 14 (fourteen) days from the day of receipt of the goods, a communication stating the intention to withdraw from the contract .. The goods must be returned intact and carefully packed in the original packaging, complete with all accessories.
NCDM2000SAS is not liable in any way for damage or theft / loss of goods returned by uninsured shipments. The NCDM2000SAS will refund the price of the goods for which the customer has exercised the right of withdrawal provided that the goods are intact and unused.
If you wish you can indicate fraction / locality / other separately.
It is important that you report a telephone contact to the courier.