eBay

GENUINE MOCAL AEROQUIP 1/2BSP OIL COOLER KIT

Engines With Metal Spin On Oil Filters Only


SUITABLE FOR:

Clio inc RS models

Not suitable for paper element/cartridge oil filters


Mocal 1/2" oil cooler kit with 1/2bsp fir tree type fittings and genuine Aeroquip AQP socketless black hose


KIT INCLUDES:

10 Row oil cooler (matrix dimensions: 235x77mm)

Oil filter sandwich plate & seal (approx 35mm thick)

M20 centre bolt

2x sandwich plate adaptors & washers

2m of 1/2" Aeroquip FBN0800 AQP high temperature/pressure oil hose

2x straight & 2x 90° push-fit unions

Universal mounting brackets & fixings


SANDWICH PLATE UPGRADES:

In very cold/wet weather over cooling of the oil can be avoided by the addition of a thermostat built into the sandwich plate:

Or the sandwich plate can be supplied with one gauge port:

It is not possible to have a thermostat and a gauge port in the same sandwich plate


ASSEMBLY OF HOSES:

The Aeroquip AQP hose & Mocal push-fit fittings supplied is designed for self assembly. No hose clips or swaging is required to secure the fittings to the hose. Once assembled the hoses have a smart/professional appearance. This innovative solution is only achieved by using hose & fittings specially designed for the purpose, therefore is it PARAMOUNT that the correct hose & fittings are used

It is reassuringly hard to fit the fittings to the hose: Dip the hose end in hot water, hold the fitting in a vice, apply WD40 (or similar) to the fitting & hose. Push the hose over the fitting in one quick action before it cools. Once assembled correctly the hose will have to be cut to remove the fitting

The kit can be supplied with an extra 1 or 2 meters of hose:


FOR ADDITIONAL HOSE / FITTINGS - PLEASE SEE OUR SHOP ITEMS


OIL COOLER UPGRADES

Rough Guide: A 13 row cooler should be adequate to cool most naturally aspirated engines up to around 150bhp (for track use) given an installation with good airflow, after this a larger cooler will be required

For road use a 13 row oil cooler is usually adequate for engines up to approx 200bhp in all but extreme conditions, after this a larger cooler will be required

The overall width including mounting brackets is 330mm

 Exact cooler size required depends upon: The type of use, ambient temperature, spec of the engine (internal friction, rev range, power etc), airflow through the cooler and over the sump

If you are using your car for any form of track, competition or high performance use then the engine oil will need cooling

The most common cause of competition / high performance engine failure is loss of oil pressure, as the oil heats up it becomes thinner. This lowers the pressure produced by the pump and increases the oil escape from the bearings lowering the overall pressure further still

Roughly speaking you need about 10psi of oil pressure per 1000rpm

e.g. 7000rpm requires 70psi oil pressure

If the pump cannot meet this demand when the oil is hot/thin engine failure will result - usually in the form of running a crank bearing (death rattle) or throwing a rod through the side of the block!

This is especially important on part worn engines - a cooler/thicker oil will give the oil pump a fighting good chance of meeting the demand. On a new or part worn engine if the oil pressure is maintained, the engine isn't over revved or over heated there is no reason for failure

For track, competition or high performance use a rough target temperature for the oil is around 100°C. Over 100°C the oil thins out rapidly and therefore drops the pressure

Turbo systems will rocket the oil temperature


For cooler, sandwich plate & hose upgrades please purchase the item & request total BEFORE payment is made. An amended invoice will then be sent


Designed for Motorsport use. No instructions are included. (Some fitting tips & tightening torques are included)

Picture shows what you will receive if you purchase this item


IMPORTANT INFORMATION:

Most of our listings have a number of postage options - please select the service you require BEFORE purchase. If you have selected a postage service with a tracking number, one will be uploaded to eBay at the end of the working day

Questions: We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 09:30-17:30), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated (if products fit other models its in our favour to say so)! Products listed as universal fitment are not designed for any one model. Models suggested are appropriate for the product listed but please check specs/sizes where stated - please have an understanding of what you are buying before purchase. Please allow 24h for us to respond to your question, if more than 24 hours has elapsed please contact us again

Feedback: Please be reasonable - we do not like to give or receive anything but positive feedback. If you have a problem with your order please contact us and give us the opportunity to rectify the situation - mistakes do happen, not often but they do happen

Above all we want you to have a positive buying experience and purchase from us again

The Aeroquip AQP hose & Mocal push-fit fittings supplied is designed for self assembly. No hose clips or swaging is required to secure the fittings to the hose. Once assembled the hoses have a smart/professional appearance. This innovative solution is only achieved by using hose & fittings specially designed for the purpose, therefore is it PARAMOUNT that the correct hose & fittings are used Questions: We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 09:30-17:30), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated (if products fit other models its in our favour to say so)! Products listed as universal fitment are no
The Aeroquip AQP hose & Mocal push-fit fittings supplied is designed for self assembly. No hose clips or swaging is required to secure the fittings to the hose. Once assembled the hoses have a smart/professional appearance. This innovative solution is only achieved by using hose & fittings specially designed for the purpose, therefore is it PARAMOUNT that the correct hose & fittings are used Questions: We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 09:30-17:30), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated (if products fit other models its in our favour to say so)! Products listed as universal fitment are no
The Aeroquip AQP hose & Mocal push-fit fittings supplied is designed for self assembly. No hose clips or swaging is required to secure the fittings to the hose. Once assembled the hoses have a smart/professional appearance. This innovative solution is only achieved by using hose & fittings specially designed for the purpose, therefore is it PARAMOUNT that the correct hose & fittings are used Questions: We are happy to do our best to answer sensible, genuine questions during our normal office hours (Mon-Fri 09:30-17:30), however please note we do not have intimate knowledge of all makes & models or have personal experience of fitting/using all our products. Products only fit models stated (if products fit other models its in our favour to say so)! Products listed as universal fitment are no