eBay
Any applicable import duties, taxes and fees
are not in the item price or the Shipping costs included.
The buyer is for this Fees yourself responsible.



Retro sound
Model RSD-Becker-1A



Classic car radio for many

BMW / Mercedes / Porsche / VW


Keyword H mark:
Any concerns that your H license plate may be affected by the
Installation of a RetroSound car radio would be at risk are unfounded.
In this case, we have a confirmation with your consent for you
of the complete AKE working group (TÜV SÜD, TÜV Rheinland, TÜV
Nord, Dekra, KÜS, GTÜ) which says that the RetroSound "Model
Zuma "and the RetroSound" Model Two "including vehicle-specific ones
Cover and control buttons installed in vintage cars with H license plates
may or Do not prevent the allocation of the H mark!


Furnishing:
- Adjustable LCD lighting with 32,000 different colors
- FM / AM radio receiver and 30 station presets
- Tuner with European even radio frequencies
- Integrated 4-channel amplifier (4 x 24 watts RMS / 45 watts max.)
- 3 equalizer programs plus individual bass / treble / fader / balance setting
- E-approval e13 03 10006 e13 * 72/245 * 2006/96 * 10006 * 00
- XBAS loudness function
- Auto-reset to factory settings if there is no power for 5 minutes

Expansion options:
- 1 AUX inputs (stereo)
- Separate switch-on line for motor antenna and amplifier


Technical specifications:
- VHF European broadcasting frequency range 87.5-107.9 MHz.
(in 0.05 MHz steps)
- MW frequency range 530-1710 kHz (in 9 kHz steps)

General data:
- Dimensions of the basic radio unit 101x51x136mm
- Power supply 10.5 to 14.4 volts
- Maximum power consumption 15 amps
- Quiescent current 3.5 mA
- Output power 12V, 4 ohms, <1% distortion: 4x15 watts sinus
- Speaker impedance 4-8 ohms
- Input sensitivity AUX1> 300 mV / 6 kOhm
- E-approval e13 03 10006 e13 * 72/245 * 2006/96 * 10006 * 00


Dimensions of the front panel:
Height 59 mm
Width 189 mm
Depth 27 mm


Overall dimensions of the device (without front panel):
- Installation depth 109mm
- Installation height 51mm
- Installation width 101mm
- Front depth 27mm
- Front height 38mm
- Front width 89mm


Hole cutout for assembly
with sheet metal mounting frame:
- 182 x 53 mm (1-DIN cutout)




We also have a lot of vehicle-specific ones
Loudspeakers for old and youngtimers
in special sizes.
You can find these in our Ebay shop


 
 



Should you have any questions about the product
so write us an Ebay message
or use the phone number or
Mail address below in the
"Legal information of the seller"
> "complete information"


You can reach us at the following times:

Tuesday - Friday 10 a.m. - 6 p.m.
Saturdays 10 a.m. - 2 p.m.

SET WITH
Any concerns that your H license plate may be affected by the Installation of a RetroSound car radio would be at risk are unfounded. In this case, we have a confirmation with your consent for you of the complete AKE working group (TÜV SÜD, TÜV Rheinland, TÜV Nord, Dekra, KÜS, GTÜ) which says that the RetroSound "Model Zuma "and the RetroSound" Model Two "including vehicle-specific ones Cover and control buttons installed in vintage cars with H license plates - Integrated 4-channel amplifier (4 x 24 watts RMS / 45 watts max.) - 3 equalizer programs plus individual bass / treble / fader / balance setting - E-approval e13 03 10006 e13 * 72/245 * 2006/96 * 10006 * 00 - Auto-reset to factory settings if there is no power for 5 minutes - E-approval e13 03 10006 e13 * 72/245 * 2006/96 * 10006 *