eBay
Important note for customers outside the EU!
Any applicable import duties, taxes and fees
are not in the item price or den Shipping costs included.
The buyer is responsible for this responsible for fees.



vehicle specific
Color rear view camera
to replace the original 3. brake light lens



Fitting for following vehicles:

Type: Year of construction:
Ford transit 7. generation   from 2013 ->
Ford transit 7. Gen. Facelift  from 2019 ->
Ford transit (V363)           from 2014 ->



The easiest solution to retrofit a reversing camera:
Without changes to the vehicle - such as
drilling mounting/mounting holes – just that
the glass of the 3 Replace the brake light on the roof edge
and screw on the glass with the camera.

The camera can be connected to all moniceivers, naviceivers and
Connect monitors that have a reversing camera
have input. The small, unobtrusive super wide-angle
Camera adapts perfectly to the vehicle optics and switches
engages automatically when reverse gear is engaged.

Due to their very high sensitivity to light and the
6 infrared LEDs enables the camera even in bad
Optimum visibility in light conditions or at night
rear and is the perfect parking and reversing aid
for your vehicle.

In addition, the camera can still be swiveled around in the housing
to be optimally aligned.

The large horizontal viewing angle of 170°
ensures an excellent overview of the processes
behind their vehicle. Thanks to the high image resolution,
Image quality is very sharp and detailed.



Technical specifications:
- Mirrored image display
- Auxiliary lines: switched on at the factory (can be switched off by disconnecting the cable loop)
- Image sensor: " CMOS PC7070
- Resolution 648x488 pixels
- Viewing angle 170° diagonal - Viewing angle 120° horizontal
- Vertical adjustment of the camera 20°
- Picture format: NTSC
- 580 lines resolution
- IP68 waterproof
- Integrated infrared lighting
- Integrated microphone
- Operating voltage: 9-16 volts DC
- Power consumption: max. 150mA
- Operating temperature: -30° to 70°C
- Minimum illumination: 0 lux
- Colour: red/black
- Cable length: 10 meters
- E approval E9-10R-05.1652
- CE approval EN 55022: 2010; EN61000-3-2:2006+A1:2009+A2:2009;
EN61000-3-3:2008; EN55024:2010
- FCC approval ANSI C63.4-2003


Scope of delivery:

new item in original packaging
Camera pre-installed on brake light mount
total 10 meter connection cable to the monitor
Bill to your Name with identified VAT.



Visit my ebay shop: acr-hof


If you have any questions about the product
have, so write us an Ebay message
or use the phone number or
Email address below in the
"Seller's Legal Information"
> "complete information"


You can reach us at the following times:

Tuesday - Friday 10 a.m. - 6 p.m
Saturdays 10 a.m. - 2 p.m



DISCONTINUED WITH
are not in the item price or den Shipping costs included. The buyer is responsible for this responsible for fees. The easiest solution to retrofit a reversing camera: the glass of the 3 Replace the brake light on the roof edge The camera can be connected to all moniceivers, naviceivers and have input. The small, unobtrusive super wide-angle Camera adapts perfectly to the vehicle optics and switches engages automatically when reverse gear is engaged. In addition, the camera can still be swiveled around in the housing behind their vehicle. Thanks to the high image resolution, - Auxiliary lines: switched on at the factory (can be switched off by disconnecting the cable loop) - Viewing angle 170° diagonal - Viewing angle 120° horizontal - CE approval EN 55022: 2010; EN61000-3-2:2006+A1:2009