1 Ltr Grazon Pro Weedkiller
A foliar acting herbicide for the control of Nettles. Docks, Thistles, Branbles, Broom and Gorse in established grasslands.
For spot treatment by knapsak use 60ml Grazon Pro in 10 litres of water.
Use GrazonPRO® because:
It contains 60 g/L clopyralid + 240 g/L triclopyr. This combination provides excellent control of broad-leaved dock, curled dock, creeping thistle, spear thistle and common nettle and also has an effect on a large range of other weeds – see our weed list
It is one of very few products with a label which fully endorses the use via hand held application equipment
It is fast acting and controls a wide spectrum of weeds
It moves to the roots ensuring high levels of long-term control
Stock grazing can resume only 7 days after application (but longer if poisonous weeds such as ragwort are present)
It is very good value for money – 16 knapsacks from each litre of product when mixed in 10 litre batches
It is rainfast in only 2 hours and is very safe to grass.
Best Use Advice Spot treatment with GrazonPRO
GrazonPRO is a professional use product, therefore ensure all knapsack operators have necessary PA1 and PA6 qualifications
Service and maintain knapsack sprayers regularly and calibrate before use
Fit an appropriately sized nozzle to deliver a medium to fine spray pattern
Users should wear appropriate PPE when mixing and applying GrazonPRO: face shield, gloves, coveralls and rubber boots
Apply at the rate stated on the label – for GrazonPRO this is 60 ml in 10 L water
Apply chemical to a dry foliage area, avoid applications to disease or pest ridden targets as this will affect the efficacy of the spray
Spray to thoroughly wet the foliage of the target weed, but avoid application to the point of run-off.
Maximise success with GrazonPRO – 10 top tips:
Peel open the label and read in full before use
Use only through a knapsack or other hand held equipment, e.g. lance
The rate of application is 60 ml in 10 litres of water
Target weeds at the right size – young and actively growing is best. If you have topped the weeds first then wait 2-3 weeks for sufficient weed regrowth before spraying
Ensure your knapsack is properly maintained, clean and free of dirt with the nozzles able to deliver a consistent and even spray
Wear suitable protective clothing when handling and measuring the concentrate and whilst spraying – gloves, coveralls and rubber boots are essential
Spray until weed leaves are thoroughly wet, but stop before the spray runs off the leaves
GrazonPRO is LERAP Category B, so spray must not fall within 1 metre of the top of the bank of a flowing or static water body. Spray must be aimed away from the water
Keep other people and pets out of treated areas for at least 2 hours until spray has dried on leaf
When spraying is finished, clean out the tank, spray lines and nozzle, making sure the washings go on a treated area. If the GrazonPRO container is empty, rinse thoroughly 3 times with clean water and dispose of the rinsings on the treated area.
Product Registration Number:
MAPP 15751
Active Ingredient:
240 g/litre triclopyr + 60 g/litre clopyralid
Pack Size:
1.0 Litre
Formulation:
Emulsifiable concentrate
Recommended Dose:
60 ml Grazon Pro in 10 L water
Maximum Total Dose:
One per year
Latest Timing:
7 days before grazing, 28 days before cutting
Water Volumes:
60 ml Grazon Pro in 10 L water
Spray Quality:
MEDIUM as defined by BCPC
LERAP:
B
Important Information
For use as an agricultural herbicide
Do not exceed one treatment per year
Do not apply through hand held rotary atomiser equipment
The maximum concentration must not exceed 60ml product per 10 litres of water
Keep livestock out of treated areas for at least 7 days and until foliage of any poisonous weeds such as ragwort has died and become unpalatable.
Application must not be made outside the period 1st March to 31st October
NOT TO BE USED ON FOOD CROPS
Please be aware that by proceeding you are agreeing to the legal responsibilities covering the storage and use of professional pesticides. The purchaser and/or end user must hold the correct qualifications and use products in line with the industry Code of Practice.
Please read the label before applying the product
Highlands and Islands are subject to a remote delivery surcharge.
Please see list below for postcodes affected
Glasgow: FK18-19
Inverness: IV1-28, IV30-32, IV36, IV40, IV52-54, IV63, KW1-14, PH19-26, PH30-35
Inverness: HS 1-8, IV 41-49, IV 51, IV 55-56
Isle of Man: IM1-9, IM99
Isle of Wight: PO30-41
Kilmarnock: KA27-28
Oban: PA20-33, PA35-38, PA49, PH36-39, PH49, PH50
Oban: PA62-72, PA74-75, PA80, PA40-41
Oban: PA 34, PA 41-48, PH 42-44
Oban: HS 9, PA 61, PA 73, PA 76-78
Orkney: KW 15-17
Perth: PH17-18
Shetland: ZE1-3
Truro (Scilly Isles): TR21-25
Channels Islands
Please contact before your purchase for total item price including remote delivery surcharge |