eBay
TRE

Injector Dynamics Direct Warehouse Distributor - All ID Products Available!
Visit our
eBay Store for all other auctions or contact us and we can create a special listing for you!

NEW Injector Dynamics 1050cc Fuel Injectors

This auction is for one Set of 8 Injector Dynamics ID1050 High Resistance, saturated fuel injectors. You will receive a Set of 8 The ID1050 was the first offering from Injector Dynamics, and was also the first to offer a number of innovative features to the motorsport community. This series of innovations and "firsts" have made it the most popular - and most copied - injector on the market today. With a maximum pressure capability of 7 bar and smooth response at low flow, this is a versatile injector that will be at home in many different applications. From high power high boost daily drivers, to NHRA Pro Stock Motorcycles and record setting turbo road race sedans, the ID1050 set the standard and marked the beginning of a NEW ERA in fuel injector performance.

-The first injector offered with full dynamic characterization providing tuners with the data they needed to do their job properly.
-The first injector to be offered in dead time matched sets.
-The first high impedance high flow injector available providing stock idle and drivability on engines as small as 325cc per cylinder.
-The first injector offered with the now standard "Top Hat Adapter" making it plug and play in nearly any application.

Nominal Flow Rate – 1065cc/min @ 43.5 psi (3 Bar)
Maximum Differential Fuel Pressure – 10.0 Bar (145.0 psi)
Fuel Compatibility – Compatible With All Known Fuels
Electrical Connector – EV6 / USCAR *No Adaptor, Orange lower o-ring*

Please view the details section below to verify these are the correct injectors for your application

Wholesale Distribution available, contact us and we can create a special listing for you!

  

Wholesale Distribution available, contact us and we can create a special listing for you!

The Injector Dynamics Data:

Are you tired of pouring over logs, making corresponding changes to your tune, only to find that what worked one day is off by the next? Have you wasted hours sifting through a myriad of injector related forum posts, only to find that there is no simple solution? Such is the nature of tuning with inaccurate injector data. Accurate injector characterizations are the basis of all fueling calculations, so it’s no wonder that if you’re tuning without them, you will spend a lot of valuable time making the best of a bad situation. It will keep you busy searching for endless combinations of mostly incorrect answers, and it will rob you of the most basic functions provided by the guys who spent millions of R&D dollars designing the engine management system for your car. Whether you are a professional tuner, or an end user, you can spend countless hours getting it “mostly correct” or you can copy and paste accurate characterization tables and get on with the job of maximizing performance and drivability. Injector Dynamics is the only motorsport injector supplier capable of generating these OEM quality injector characterizations, and our engineering services are available to generate data for new platforms and applications at no cost to our customers.

These Injector Dynamics fuel injectors will fit many applications, including, but not limited to:
2015+ Dodge Charger 6.2L
2015+ Dodge Challenger 6.2L
2018-2021 Jeep Trackhawk 6.2L

Slope and Offset vs. Pressure data and tuning data for EFI Live and HP Tuners are available upon request.

Specifications:

Typical Flow Rate in CC per minute: 1065cc/min @ 3.0 Bar (43.5 psi) Using Iso Octane at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure – 10.0 Bar (145.0 psi)
Fuel Compatibility – Compatible With All Known Fuels – (Designed Specifically for Alternative Fuels)
Electrical connector type: EV6 / USCAR *No Adaptor, Orange lower o-ring*
Injector Body Design: Metal and composite plastic
O-Rings Included: Yes, on the injectors
Length of injector from o-ring to o-ring: 48mm
Diameter of top o-ring / fuel rail bore: 14mm
Diameter or style lower o-ring or cushion: 15mm - late model GM lower o-ring

All high performance injectors will require ECU tuning for proper performance.

We have injectors to fit almost every performance application!
Check out our eBay Store or contact us:

  
-IN STOCK ITEMS- Ship no later than the second business day after receiving cleared payment.




Any item paid for with an echeck through PayPal will not ship until the money clears, typically 3-5 business days.
Check at www.ups.com for your location.
-USPS Priority Mail- 1-4 days but no detailed tracking with this service.
-USPS Express Mail- 1-3 days and more detailed tracking than priority.
BUYER BEWARE - NO TRACKING with this service.
-USPS Express Mail- HIGHLY RECOMMENDED 3-5 days typical delivery time with tracking, but as long as 2-3 weeks on rare occasions.
-USPS Global Express Guaranteed- 1-3 days GUARANTEED!
All customs fees are paid by the receiver.
Please research your customs fees with your local government before ordering so you know what to expect to pay once the shipment arrives.
We do not lower invoice values since it is a violation of US and International custom laws.
All international shipments are shipped with the correct value for the parts shipped.
eBay's NEW Feedback and Detailed Seller Ratings (DSRs)

If you give us 4 Stars, it may seem like a good score, technically a 4 is "Satisfied", eBay, however, considers this a low grade. eBay requires sellers to maintain very high standards to continue receiving the best pricing, which leads to lower item costs for the customer. If you were satisfied with the transaction, please leave positive feedback with all 5 Stars for the DSR ratings.

Please be patient and don't give negative feedback or below 5 star Detailed Seller Ratings without talking to us first.
Let us work to resolve your problem so everyone is happy.
  
Credit card payments can be made by calling

Due to new eBay policies, sellers are no longer allowed to accept any other method of payment for eBay items besides credit card, debit card or paypal.
This means that TREperformance is not allowed to accept other payment methods for any item purchased through eBay.
It is always acceptable to visit our store in person to make payment and pickup your item at:

TREperformance
1725 Monrovia Ave.
Suite D7
Costa Mesa, CA 92627

  
We also must charge a 20% restocking fee on any order which is cancelled after payment has been received, even if that order has not shipped. This is also to help cover the fees associated with eBay, PayPal, order processing, restocking, etc. If you would like to return or exchange an item please email us with your paypal or authorize.net transaction id # and the reason for the return or exchange.
No returns are accepted without an RMA number which is given to the customer by TREperformance via email. Always have the RMA number clearly written on multiple sides of the package when you return the item. If it is not clearly written on multiple sides of the box it may be returned to sender. All returns must be received within 30 days of purchase.

ACCEPTANCE OF TERMS:
Your bid is a contract! By clicking upon "Place Bid" or "Buy It Now" or "Make Offer" the Buyer acknowledges that this action shall be treated as a legally binding "electronic signature," as this term is defined under federal law in the Electronic Signatures in Global and National Commerce Act of 2000. Buyer also acknowledges that he/she has read this web-page, as well as eBay's "Rules for Buyers" in there entirety, and has unconditionally accepted all terms included therein. Buyer also thereby warrants that he/she has any applicable legal authority to purchase this equipment, and that he/she will not use, sell, or otherwise distribute this item in any manner in violation of applicable state and federal laws. Buyer also agrees to indemnify and hold harmless TREperformance for liability from any and all claims arising out of Buyer's use, sale, or other distribution of this item. No refunds will be given unless the buyer receives prior written approval from TREperformance, and no repairs will be provided, nor labor charges covered by TREperformance in any situation. Seller reserves the right not to sell to bidders with excessive negative or "0" feedback.
  
Contact info:
Email Anytime
Storefront Hours: Monday - Friday 8:00 AM - 4:00 PM PST

TREperformance
1725 Monrovia Ave.
Suite D7
Costa Mesa, CA 92627

Are you tired of pouring over logs, making corresponding changes to your tune, only to find that what worked one day is off by the next? Have you wasted hours sifting through a myriad of injector related forum posts, only to find that there is no simple solution? Such is the nature of tuning with inaccurate injector data. Accurate injector characterizations are the basis of all fueling calculations, so it’s no wonder that if you’re tuning without them, you will spend a lot of valuable time making the best of a bad situation. It will keep you busy searching for endless combinations of mostly incorrect answers, and it will rob you of the most basic functions provided by the guys who spent millions of R&D dollars designing the engine management system for your car. Whether you are a professio