eBay
 
JDM Garage UK


Worldwide shipping
JDM Garage UK
Specialising in used Nissan Parts for a wide variety of Nissans, including the Skylines, GTR and 200sx/Silvias.
Haltech Elite 1500 + Premium Universal Wire-in Harness Kit 2.5m
LENGTH: 2.5m (8')
OUTPUTS: Up to 4 injector and 4 ignition.
SUITS: Universal 1-12 cylinder or 2 rotor applications.
INCLUDES: Elite 1500 ECU with DBW and Race Functions. Premium Universal Wire-In Harness. Firewall grommet, moulded 6 power circuit Haltech fuse box and lid. 4 relays, 7 fuses and pins for the 2 spare power circuits. Waterproof USB cap, USB programming cable and USB Software Key.
HARNESS OVERVIEW
Ideal for dedicated race cars, engine swaps and custom wiring jobs. The Universal Wire-in Harness has a set of ECU connectors at one end and unterminated wires at the other. All the wires at the unterminated end are colour coded and clearly labelled. Connect your Haltech ECU to the terminated end and follow your wiring diagram for all the engine connections. Load your base map and you're ready to go!
Colour coded and labelled wires that match the detailed wiring diagram for a confusion free construction process.
The wiring diagram is accompanied by the full ECU manual and Software located on the CD or USB key provided with the ECU to refer to while completing your installation and configuration.
ECU OVERVIEW
Featuring a robust, environmentally sealed waterproof case, drive by wire throttle control, intake and exhaust cam control, short term and long term map learning, knock control, and much more, the Elite 1500 ECU provides engine calibrators the tools they need to get the job done right. Alongside the Elite 1500 ECU is the Elite Software Programmer (ESP) that brings levels of functionality and user friendliness never seen before in an engine control package. Together they offer true cutting edge technology to tuners and performance enthusiasts worldwide.
Supports 1 to 12 cylinder engines
2 rotor engines
Normally aspirated or forced induction
Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF)
Staged, sequential, semi sequential, batch or multipoint injection patterns
Distributor ignition systems, multi-coil systems, expand CDI range or Haltech Multiplex CDI systems
Connect to a wide range of display dashes and expansion devices via CAN.
4 x fuel injection outputs
4 x ignition outputs
12 x digital outputs
10 x analogue voltage inputs
4 x synchronised pulsed inputs
3 x dedicated inputs (knock, ignition switch & onboard MAP Sensor)
2 x dedicated engine position inputs with extensive trigger type support
Up to 45 channels of Input & Output (I/O) expansion (via CAN)
USB laptop communication (Windows)
ESP Calibration Software - intuitive and easy to use
HARNESS FEATURES
This harness when installed in conjunction with a Haltech Elite ECU opens the door to virtually limitless performance modification and tuning of your vehicle.
Fully programmable systems allow you to extract all the performance from your engine by delivering precisely the required amount of fuel and ignition timing that your engine requires for maximum output under all operating conditions. 
ECU FEATURES
Drive by Wire Throttle Control (DBW).
Low Impedance Injector control with programmable injector peak and hold currents and programmable peak time.
Flex fuel support (Direct sensor input). Tune your engine's boost, fuel and ignition by ethanol content.
Flexible tuning setup for Petrol (Gasoline), Methanol and Ethanol.
Closed Loop 02 Control. Dual bank control for precise tuning (with optional external CAN O2 Wideband Controller Kit).
Knock Control. Synchronised to engine position with high speed digital filtering for accurate detection.
Variable cam control - Independently control up to 4 camshafts.
Closed Loop Idle Speed Control with learning for consistent idle stability.
Long term learning (auto tune) on fuel, ignition, cam, boost and idle control maps (up to 4D).
On-board data logging. Up to 40 channels of logging at sample rates up to 5ms (200Hz) with 2MB of internal memory.
Laptop data logging. DLog all available channels directly to your laptop's hard drive for both tuning and diagnostics.
Dual CAN Bus communication for Haltech dashes and expansion devices. Supports OEM CAN and OBDII. View live engine data and set/clear diagnostic trouble codes.
1 - 4 Injection stages with individual injector flow rates per injector.
Anti-Lag/Rotational idle for closed course racing, rally, circuit or drift. Build and maintain boost during closed throttle conditions.
Rolling Anti-Lag. Lock to your current or pre-set RPM or road speed for roll racing or pit lane limiting.
Launch Control. Control your engine's power delivery, RPM and boost for consistent performance at the start line.
Traction Control. Control your engine's power output via mappable front vs rear axle or individual wheel speed slip.
ADVANCED TUNING
Tuning table resolution up to 32 x 32 x 8
Limitless tuning flexibility. Tune your engine by a combination of 4D tuning tables combined with 3D per cylinder compensations and multiple user-definable corrections.
Per Cylinder Tuning Correction - 3D
Wideband O2 Control. Connect up to 9 channels via CAN expansion devices.
Thermocouples/EGT (Exhaust Gas Temperature). Connect up to 12 channels via external CAN expansion devices.
Advanced Engine Protection. Set multi-level limits for sensors and protect your engine against common causes of failure.
RACE FUNCTIONS
Nitrous control with advanced programming of up to 6 stages of wet or dry nitrous kits with on/off delays and banked control options. 3D fuel and ignition corrections for all stages.
Boost control. Intelligent 4D closed loop learning with flexible, user-definable axis and 14 fully user-definable corrections.
Sequential turbo control
CO2 boost control. Wastegate pressure and position, intake air bleed control (charge pipe wastegate) functionality for the hard-core racer.
Flat shifting. Optimise your shifting precision via a combination of inputs such as a clutch switch or strain gauge.
Shock Travel/Ride Height inputs allow dynamic tuning and data logging to assist in chassis development and power delivery.
Timer functions. Use the combination of the race timer and 5 additional programmable timers for time-based control of multiple engine parameters, power delivery and other user definable functions.
Trans brake function allows smooth and consistent control of start line staging (Bump or Creep).
Payment Options
Payment
Payment must be made within 5 working days using one of the following methods PayPal, credit card (Visa, Mastercard, Switch or Visa/Delta) or bank transfer. We do not accept payment via cheque, postal order or any other means.
SHIPPING
  • We ship all items within 3 working days unless otherwise specified.
  • The listing delivery price is for shipping to the Mainland UK ONLY. This does not include Channel Islands, Northern Ireland and Scottish Highlands. Please contact us for a shipping quote to these destinations or any overseas destinations. Shipping, Handling and Insurance Fees are not negotiable.
  • We do not ship items on weekends, bank holidays or national holidays.
  • We ONLY ship to the PayPal address used when paying for the item. We are not responsible for incorrect or undeliverable addresses and you may be charged for a re-delivery.
  • We will ship worldwide, please email us your complete address for a quote.
  • If your parcel has been dispatched and not arrived please contact us via email or phone and we can provide tracking details for your parcel.
  • You will be required to sign for your parcel when it is delivered. If you are not at home when the parcel arrives, a card will be left for you to arrange an alternative delivery date with the courier.
Frequently Asked Questions 
  • What can I do if the item I've received is not as described or damaged?
    Please contact us as soon as possible to make us aware of a problem, we'll do our best to solve this for you as quickly as we can.
  • When will you post my item?
    Within 3 working days, unless otherwise specified.
  • When will I receive my item?
    All Mainland UK orders are dispatched by Royal Mail First Class or City Link, depending on the size and weight of the item. You should receive your item within 1 - 2 days of dispatch. For all Offshore and International orders please contact us to find out the delivery time to your country.
  • Can I ask for a refund or replacement if I haven't received my item?
    If your item has been sent my Royal Mail you should allow 15 days from the date of dispatch before an item is considered lost. If your item has been shipped by City Link please contact us within 1 - 2 days. If you have any queries regarding your delivery please contact us.
  • Can I ask for a refund or replacement if I'm not satisfied with the item I've received?
    According to the Distance Selling Regulations you have 14 working days from the day you receive the item to cancel your order. We allow 14 DAYS for you to cancel your order and return it to us, return postage is to be paid for by yourself and we recommend suitable insurance. Once the item has been returned and checked over we will issue a refund EXCLUDING the cost to us of the original delivery charge, even if the item is listed with Free Delivery.