PRODUCT DETAILS:
Short Specifications:
- Time Range: 1.2 s to 300 hr
- Input Voltage: 100-240VAC
- Contact Output: 100-240 (50/60 Hz) VAC / 100-125 VDC
- Terminal Form: 8-Pin Round
- Mode: A & E ONLY
- Timing Function: A=ON-Delay (power supply start) or E= Interval (power supply start)
Rated supply voltage: 100 to 240 VAC, 50/60 Hz
100 to 125 VDC, ripple: 20% max.
Operating voltage range 85% to 110% of rated supply voltage
Input signals Reset, Start, Gate
Power consumption (Relay ON) Approx. 2 VA, 1.6 W (at 240 VAC, 60 Hz)
Power consumption (Relay OFF) Approx. 1.3 VA, 1.1 W (at 240 VAC, 60 Hz)
Reset voltage 10% max. of rated supply voltage
Number of time ranges 14
Time ranges
0.05 s to 1.2 s, 0.12 min to 1.2 min, 0.12 h to 1.2 h, 1.2 h to 12 h,
0.3 s to 3 s, 0.3 min to 3 min, 0.3 h to 3 h, 3 h to 30 h, 1.2 s to 12
s, 1.2 min to 12 min, 12 h to 120 h, 3 s to 30 s, 3 min to 30 min, 30 h
to 300 h
Operating mode ON delay, Flicker ON start, Interval, One shot output
Control output Type Relay output (DPDT)
Control output (Contact output) Switching capacities (resistive load (cos(phi)=1)): 250 VAC 5 A, 30 VDC 5 A
Minimum applicable load: 10 mA at 5 VDC (failure level: P)
Ambient temperature Operating: -10 to 55 CEL
Storage: -25 to 65 CEL (with no icing)
Ambient humidity Operating: 35 to 85%
Storage: 35 to 85%
Characteristics Accuracy of operating time: +/-0.2 % (FS) max. (+/-0.2% +/-10 ms max in a range of 1.2 s&3 s)
Setting error -5 to 5% (FS) -50 to 50 ms max.
Reset time 0.1 s max.
Influence of voltage +/-0.2% FS max. (+/-0.2% +/-10 ms max. in a range of 1.2 s and 3 s)
Influence of temperature +/-1% FS max. (+/-1% +/-10 ms max. in a range of 1.2 s and 3 s)
Insulation resistance 100 MOhm min. (at 500 VDC)
Dielectric strength
- between current-carrying metal parts and exposed non-curernt-carrying. Metal parts: 2000 VAC, 50/60 Hz for 1 min
-between control output terminals and operating circuit: 2000 VAC, 50/60 Hz for 1 min
-between contacts of different polarities: 2000 VAC, 50/60 Hz for 1 min
-between non-continuous contacts: 1000 VAC, 50/60 Hz for 1 min
Impulse withstand voltage
-between power terminals: 3 kV
-between exposed non-current-carrying metal parts: 4.5 kV max.
Noise immunity
+/-1.5 kV (between power terminals) and +/-600 V(between input
terminals), square-wave noise by noise simulator (pulse width: 100 ns/1
us, 1-ns rise)
Static immunity Mulfunction: 8 kV Destruction: 15 kV
Vibration resistance (Destruction) 10 to 55 Hz, 0.75 mm single amplitude each in X, Y, and Z directions for 2 hours
Vibration resistance (Malfunction) 10 to 55 Hz, 0.5 mm single amplitude each in X, Y, and Z directions for 10min
Shock resistance (Destruction) 1000 m/s2 3 times each 6 directions
Shock resistance (Malfunction) 100 m/s2 3 times each 6 directions
Mechanical Life expectancy (relay output) 20000000 operations min. (under no load at 1800 operations/h)
Electrical Life expectancy- 100000 operations min.(5 A at 250 VAC,resistive load @ 1800 operations/h)
Degree of protection IEC60529(JEM): IP40(panel surface)
Applicable standard (UL) Standard No.: UL508
File number: E41515
Applicable standard (CSA) Standard No.: CSA C22.2 No.14
File number: LR22310
Applicable standard (LR) 99/10010
Applicable standard (NK) A-323-1B
Applicable standard (EC Directive (Low Voltage Directive) ) EN61812-1
IEC60664-1 4 kV/2
Applicable standard (EC Directive (EMC Directive) )
EMI: EN61812-1
Emission Enclosure: EN55011 Group1 class A
Emission AC mains: EN55011 Group1 class A
EMS: EN61812-1
Immunity ESD: IEC61000-4-2(6 kV contact discharge, 8 kV air discharge)
cRF-interference: IEC61000-4-3(10 V/m, AM radio wave (80 MHz to 1 GHz), 10 V/m, Pulse-modulated waves (900 MHz +/- 5 MHz))
Immunity Conducted Disturbance: IEC61000-4-6(10 V (0.15 to 80 MHz))
Immunity Burst: IEC61000-4-4(2 kV power-line, 2 kV I/O signal-line)
Immunity Surge: IEC61000-4-5(1 kV line to line, 2 kV line to ground)
External connection method 8-pin round socket
Case color Munsell 5Y7/1(Light gray)
Weight Approx. 90 g
The following components are included in this sale:
1x Omron H3CR-A8 Timer
Cosmetic Notes:
The Omron timer is NEW!! It is being sold as is, as pictured. See above for any additional notes.
** Please visit OUR eBay STORE to view more Omron products. **
See Below For Terms & Conditions: Unless stated otherwise, accessories such as Power Cords, Probes, Software, Batteries, AC Adapters, and/or other Cables etc. are not included.
Payment Methods:
We reserve the right to restrict payment methods.
4.75 x 2.5 x 2.5", 0.27 lbs Made in Japan 1-53-9 km
If NOT paid after this time, the transaction will be cancelled and the bidder will forfeit ALL rights to the item.
We Guarantee Item Condition As Stated in the
Cosmetic & Testing Notes Above.
ALL SALES ARE FINAL.
Unless otherwise noted, the items advertised in this ad are offered "AS-IS, WHERE-IS", with all faults, and may be Damaged, Used or may have Missing Parts and/or Accessories.
Seller expressly disclaims any Warranty of Merchantability, fitness for a particular purpose or non-infringement.
WYSIWYG What you "See" is what you get.
Please review the pictures & description very carefully!
Accessories, Cables, Probes etc. are NOT included unless specified in the advertisement.
IMPORTANT END AUCTION INFO:
- The Purchaser will receive an email within 2 business days with totals based on the address that eBay provides.
- We will send you an eBay invoice, and may send a more detailed one through our business mail especially for credit card or wire transfer transactions. Please check your SPAM folder if you don't see
it.
- Please ensure that we receive your correct address, as well as a phone number
- We ship 3-5 business days after receiving payment (for most items)