eBay
Rice Rocket

GATES TH35682G1 THERMOSTAT COOLANT

   
       

To Purchase One of the Following:

GATES TH35682G1 THERMOSTAT COOLANT

                                                                      

GET THE CORRECT PART FIRST TIME

PLEASE NOTE EBAY COMPATIBILITY IS A GUIDE ONLY - IT DOES NOT ALLOW FOR DIFFERENT SPECS ON EACH VEHICLE, PLEASE CHECK ALL INFORMATION COMBINED IN THE ADVERT BEFORE ORDERING, MANY CARS CAN HAVE MORE THAN ONE OPTION AND EVEN THOUGH EBAY SAYS IT WILL FIT THIS MIGHT NOT ALWAYS BE THE CASE AND COULD BE LOWER DOWN IN THE LIST OF ADVERTS , IT WILL DO THIS SOMETIMES FOR ALL OPTIONS, ITS NOT ALWAYS THE FIRST OR THE CHEAPEST OPTION THAT IS CORRECT . PLEASE MAKE SURE YOU CHECK THE NOTES SECTION TO THE LEFT OF COMPATIBILITY TABLE. IF IN ANY DOUBT PLEASE ADVISE A REG NO OR ASK SO YOU GET THE CORRECT PART FIRST TIME 

 

IF ANY DOUBT PLEASE ASK OR CONTACT CUSTOMER SERVICES UNDER BUSINESS SELLER INFORMATION AT THE BOTTOM OF EACH ADVERT

Here is listed any variations of Gates Products for your vehicle

A badly functioning timing belt drive system can cause serious problems and it is highly probable that the source of damage to one element in the drive will also have affected the other drive components.
The best way to avoid expensive premature failures is to change timing belts, idlers and tensioners all at the same time. A Gates PowerGrip® Kit provides all the appropriate components plus installation instructions in an all-in-one kit and every component in the kit is a guaranteed OE equivalent part.
Gates is your true system specialist: not only are we a renowned timing belt manufacturer, delivering products both to OEMs and to the aftermarket, but we are also one of the largest suppliers of OE tensioner units in Europe.


A PowerGrip® Kit is handily packed in a sturdy cardboard box and contains, depending on the application:
  • Timing belt(s)
  • Belt tensioner(s) or tensioner assemblies
  • Idlers
  • Other parts needed for a complete overhaul (bolts, springs, etc.)
  • (Specific) installation instructions
  • Mileage sticker

In many cases, it is recommended to replace not just the timing belt and the metal components, but also the water pump. Many water pumps are driven by the timing belt. If the water pump fails, coolant will leak and contaminate the belt. Long-term coolant contamination will eventually lead to premature timing belt failure. Thanks to the PowerGrip® Kit Plus Water Pump concept, you have all the elements necessary for a complete overhaul in one package, fit for the application.


A PowerGrip® Kit Plus Water Pump offers:
  • The same elements as a PowerGrip® Kit
    PLUS
  • The application-specific OE quality water pump with its O-ring where applicable

Thanks to their high strength and low weight, combined with long life, low noise and fuel consumption advantages, Gates timing belts are used extensively for driving the camshafts of modern automotive engines. This is a demanding task, requiring correct tensioning to ensure that belt performance is maintained at the optimum level. 

Tension is provided by a tensioner, which is either fixed or automatic. With a fixed tensioner, the installer needs to make sure it is installed correctly in order to provide the correct tension. Automatic tensioners, on the other hand, adjust themselves in order to maintain constant tension.

Automatic tensioners are designed into the belt drive system for several reasons:
• Proper tension is maintained throughout the belt life.
• They increase belt life because the belt is maintained at an ideal tension under all conditions.
• They eliminate the need for a relatively difficult tensioning operation during installation, so the belt is always installed at the right tension – and stays there!

Car manufacturers are looking to make vehicles lighter using more lightweight components. At the same time modern engines are becoming more powerful. More power means more strain on the lightweight components causing more vibrations. To address this, vehicle manufacturers have replaced the ordinary crankshaft pulley with torsional vibration dampers which absorb vibrations from the crankshaft and
extend the life time of other components in the drive system. They are vital in keeping the crankshaft and engine working properly, so you need replacement products of the highest quality.
As a complete system supplier, Gates offers you a wide range of OE equivalent DriveAlign® torsional vibration dampers that fit the application perfectly and cover all the major models in the market.

• OE fit and function
• Cover all popular applications

To pay for your goods, please use the eBay checkout.

Payment can be made by PayPal or by card.

For more details on the delivery options we have available and the costs please click here

For full details on our return policy please click here

Please feel free to contact us to discuss anything that you may have a question about.

We pride ourselves on a quality service and we are happy to address any concerns.

Contact us via the eBay messaging system or: